|Monthly Tech-Tip |
This was created by drawing the outside profile and a simple revolve operation in Fusion 360. And then shelling the shape (from the top) to 0.9mm thickness. I saved it as version 1 (v1). This was early on and I did not do this design parametrically (e.g. the height, top diameter and bottom diameter), I learned to do that later. If I had then each size could have been named height-top-bottom.
Pie-Crust Mug-Making Method
Tony Hansen's project to make light, strong and functional slab-built mugs using tools and templates made possible by 3D design and 3D printing.