Monthly Tech-Tip | No tracking! No ads! |
No molds have survived so we are going to start from scratch, making the smallest of the sizes first. We will use Fusion 360 and 3D prints in PLA to create a block mold to make a rubber case mold. Drawing this correctly should reward me with some new 3D drawing skills. The geometry of the lip will be challenging. Likely the piece will need to be cast with a flat top (filling and draining done through the pour hole). I will likely have to create a 3D-printed PLA template as a cutting guide to get the contour of the lip right.
This is an 85-year-old drawing downloaded from medalta.org. Medalta Potteries manufactured crocks, on a large scale, from the 1920s on. In this example, I imported the drawing as a canvas in Fusion 360, positioning it so the center of the knob was at the origin point. I traced the lid outline to create a sketch and then revolved that to create the 3D lid. This is part of a project to enable a potter to make lids to fit the old crocks.
Projects |
Medalta Ball Pitcher Slip Casting Mold via 3D Printing
|
---|
Buy me a coffee and we can talk