Digitalfire will shut down on June 26. I no longer have the authority to grant exemption to a section in the Terms and Conditions of using material in the Insight-Live account from which I built the source material. While there are ways to comply with the take-down order, they are beyond my means because of how complex and large the site has become in the past 35+ years. It has been a wild ride for a shy prairie boy, thanks to everyone for your support. Insight-live.com is not affected by this.
It is old, but nothing we have ever used fires as evenly and reliably as this downdraft kiln. It was built by Luke Lindoe in the 1960s. I have used it through my entire life as a potter since the early 1970s. Two burners at 2 inches oil-column will take it to 1000F fairly quickly, but it takes 4 burners at 4 inches and 20 hours to get it to cone 10. I can judge the back pressure and degree of reduction by the length and color of the flames at the peepholes and color of the flame passing the damper at the back. Changing the damper position by an eighth of an inch during reduction is enough to discern a change in the flame.
| Firing Schedules |
Plainsman Cone 10R Firing
Six-step oxidize-at-end schedule to 2372F |
| Articles |
Building a Lindoe Downdraft Gas Kiln
|
![]() PayPal | No tracking, No ads, No paywall, No transient content! Just organized, concise information constantly updated and improved. Was this helpful? Consider supporting me. |
Buy me a coffee and we can talk