Monthly Tech-Tip | No tracking! No ads! |
This is simple test can be done to determine if oversize particles are present in a raw material to be used for clay body manufacture. While materials are sold as minus 200 mesh, as you can see here, they don't even pass at 150 mesh. In each case, we have attempted to wash through 50 grams of the powder (using the technique of our WSR test).
All ceramic materials must be ground using particle size reduction equipment. This process enables removal of contaminants or reducing their size enough that they do not marr the fired surface of the body. This is a demanding task. Being able to measure it quickly enables spotting problems with a materials shipment (and therefore how well a supplier meets their quality obligations and the kind of product that can be made using it). Ball clays and kaolins are the most problematic, not just in particle size and contaminating particles but also fired color and plasticity.
Of course, a record of this needs to be kept. That is where an account at Insight-live.com comes in. Upload pictures like these or just make a note of the result.
This picture has its own page with more detail, click here to see it.
These are the oversize particles (from the 70, 100, 140 and 200 mesh sieves) from 100 grams of a commercial ball clay. They have been fired to cone 10 reduction. As you can see, this material is a potential cause of specking, especially in porcelain bodies. It is not only wise to check for oversize particles in clays, but firing these particles will reveaal if they contain iron. A 200 mesh screen would be a good start for this test, it would catch all of these.
Tests |
Wet Sieve Residue
|
Buy me a coffee and we can talk