|Monthly Tech-Tip |
This unbelievable body is made from dolomite, 65% of it. There is 35% ball clay to give it workability and 5% Ferro frit 3110. The frit stabilizes it so that the fired body does not rehydrate. This has a porosity of 35%! And that porosity is stable across the entire range we have fired it at (cone 06-6). The single-layer on the lower portion has been completely absorbed, the double-layer on the upper is almost gone.
Clay Body Porosity
In ceramics, porosity is considered an indication of density, and therefore strength and durability. Porosity is measured by the weight increase when boiled in water.