|Monthly Tech-Tip |
These are Plainsman Coffee clay. They, and the handles, were made on the wheel about half an hour ago, then stiffened enough in front of the fan to enable handle attachment. Coffee clay is plastic and will crack if pieces are not dried evenly. But if they are dried evenly, there is no problem. The handles were waxed after they were attached (leaving only a thin section on the inside where some water could escape). This slowed them down, otherwise they would have dried far ahead of the body. They went in the kiln and were ready for glazing the next morning.
Drying Ceramics Without Cracks
Anything ceramic ware can be dried if it is done slowly and evenly enough. To dry faster optimize the body recipe, ware cross section, drying process and develop a good test to rate drying performance.
During drying clays and porcelains shrink as they become rigid. When this occurs unevenly, cracks are the result.