Monthly Tech-Tip | No tracking! No ads! |
Well, actually, it is not completely pure - I had to mix in 10% bentonite to give it enough shrinkage and leather hard strength to be able to pull itself away from the plaster mold (this bowl was just extracted). It cast without cracks to 3mm thickness in about 15 minutes. The defloculated slip required more water than normal but it pours and drains beautifully. I have made higher-percentage slurries in the past using Veegum but the casting time was too long. On aging, the previous slurry did not change its rheological properties after a month of storage. Nepheline syenite is a fantastic material for pottery bodies Of course, it is not used pure, this is just a demonstration. That being said, firing tests showed a vitreous product around cone 1.
Although Nepheline Syenite and Custer Feldspar are used as effective fluxes in glazes past cone 8, curiously, neither of them melt well by themselves. Thus, both of these melt fluidity tests add 20% Ferro Frit 3134 to get them flowing. This is a 2021 shipment of the feldspar and a 2022 shipment of the nepheline.
Materials |
Covia Nepheline Syenite
|
---|
Buy me a coffee and we can talk