Monthly Tech-Tip | No tracking! No ads! |
These porcelain mugs were decorated with the same Amaco Velvet underglazes (applied at leather hard), then bisque fired, dipped in clear glaze and fired to cone 6. While the G2926B clear glaze (left) is normally a great super glossy transparent for general use, its melt fluidity is not enough to clear the micro-bubbles (a product of the LOI of body, glaze and underglaze). However the G3806C recipe (right) has a more fluid melt and thus transmits the underglaze colors better. But using a glaze like this can be tricky and it has downsides. Its melt fluidity requires care not to get it too thick (or it will run). Its high flux content means it is not as durable. And, its high KNaO content raises the thermal expansion (COE) considerably (and thus the danger of crazing). This porcelain has a high enough COE to fit most glazes so it is OK. But still, to be on the safe side, I always use the G2926B on the insides. Is this glaze perfect? No. There is room for more improvement (e.g. slow cooling the firing, drop-and-hold firing, even thinner layer).
Recipes |
G3806C - Cone 6 Clear Fluid-Melt transparent glaze
A base fluid-melt glaze recipe developed by Tony Hansen. With colorant additions it forms reactive melts that variegate and run. It is more resistant to crazing than others. |
---|---|
Glossary |
Transparent Glazes
Every glossy ceramic glaze is actually a base transparent with added opacifiers and colorants. So understand how to make a good transparent, then build other glazes on it. |
Glossary |
Underglaze
An intensely pigmented highly opaque non-melting ceramic material mix meant to adhere best to leather hard pottery and fire-fit the body. Often transparently overglazed. Starter recipes. |
Glossary |
Glaze Bubbles
Suspended micro-bubbles in ceramic glazes affect their transparency and depth. Sometimes they add to to aesthetics. Often not. What causes them and what to do to remove them. |
Buy me a coffee and we can talk