Monthly Tech-Tip | No tracking! No ads! |
The underglaze is G1214M cone 6 black (adds 5% Mason 6666 black stain). Overglaze left: GR6-H Ravenscrag Oatmeal. Overglaze right: GA6-F Alberta Slip oatmeal. Both produce a very pleasant silky matte texture (the right being the best). Both layers are fairly thin. In production it would be best to spray the second layer, keeping it as thin as possible. It is also necessary to adjust the ratio of raw to roasted Alberta or Ravenscrag Slips to establish a balance between drying hardness but not too much drying shrinkage (and resultant cracking).
At various thicknesses on M340, M370, P300. Fired at cone 6 oxidation using the C6PLST firing schedule.
For speckle add granular manganese (adjust the percentage to get the desired speckle density, start at 0.25%). Since the manganese particles are very heavy, and thus want to settle out, the glaze slurry should be thixotropic and stirred before each dip.
Recipes |
GR6-H - Ravenscrag Cone 6 Oatmeal Matte
Plainsman Cone 6 Ravenscrag Slip glaze. See more at ravenscrag.com. |
---|---|
Recipes |
GA6-F - Alberta Slip Cone 6 Oatmeal
Plainsman Cone 6 Alberta Slip based glaze. It can be found among others at http://albertaslip.com. |
Recipes |
G1214M - Original Cone 6 Base Glossy Glaze
A recipe developed by Tony Hansen in the 1980s. Its was popular because of the simplicity of the recipe and how well it worked with chrome-tin stains. |
Glossary |
Reactive Glazes
In ceramics, reactive glazes have variegated surfaces that are a product of more melt fluidity and the presence of opacifiers, crystallizers and phase changers. |
Glossary |
Glaze Layering
In hobby ceramics and pottery it is common to layer glazes for visual effects. Using brush-on glazes it is easy. But how to do it with dipping glazes? Or apply brush-ons on to dipped base coats? |
Buy me a coffee and we can talk