Monthly Tech-Tip | No tracking! No ads! |
20% 20-40 mesh grog was added to a Pyrax/Kaolin thermal shock body. While the insides of the pieces have a very rough surface, the outsides are smooth! Grogged casting slips have issues with the particle settling during storage and casting, however in this body the grog suspends long enough for a 15 minute casting time (and it easily mixes back in after storage). Pieces can be put into the kiln wet-out-of-the-mold and fast-heated to 250F and they do not crack.
Glossary |
Slip Casting
A method of forming ceramics. A deflocculated (low water content) slurry is poured into absorbent plaster molds. As it sits in the mold, usually 10+ minutes, a layer builds against the mold walls. When thick enough the mold is drained. |
---|
Buy me a coffee and we can talk