Monthly Tech-Tip | No tracking! No ads! |
4 inch propeller (2 inch radius) mounted on a 1/2 inch stainless steel shaft. It is not mounted right at the bottom, this is done to prevent the blade from contacting the bottom of the bucket during mixing. By googling the identification you see on this prop(Taiwan 4x4 316 propeller) you would find the site of the manufacturer (http://www.tonson-motor.com/e/p004.htm).
This is a heavy-duty one-speed mixer, home made, with a 1/3 hp motor. It that can handle 5 gallons of high density suspension glaze or body slurry.
Articles |
A One-speed Lab or Studio Slurry Mixer
A single-speed lab mixer can be made for much less money than buying a commercial unit. Using it you can slurry up a 100 lb batch of porcelain powder in minutes and it will be smooth as silk. |
---|
Buy me a coffee and we can talk