Monthly Tech-Tip | No tracking! No ads! |
Click the link below to go to this page
https://insight-live.com/insight/recipes.php?OpenFile=q6csLckZWq
Use this model to create a multi-piece mould to make flow testers. This link enters your Insight-live account so you need to be logged in.
Available on the Downloads page
This picture has its own page with more detail, click here to see it.
This is a 3D rendering of our melt fluidity tester. We have promoted this device for many years as an effective way to compare fired glaze properties (e.g. melt fluidity, surface tension, bubble retention, crystal growth, transparency, melting range, etc). Open the 3MF file in your slicer, move all pieces off the print bed and unselect them all. Then, print each part by moving it onto the bed and using place-on-face to orient it right. Print the funnel wide-side down with brim. Insert the natch clips and embeds into the holes, pour in the plaster, let it set and finally remove the PLA with a heat gun. You now have a working mold to make slip cast testers. Glue the natches and spacers into the embeds, strap the mold together, glue in the pour spout with slip and finish by filling the mold with slip. If the mold is dry, 10-15 minutes should be enough to get adequate thickness (don't make them too heavy). With 0.8mm thick walls, this drawing 3D prints quickly and is easy to remove when the plaster has set (using a heat gun). The halves interlock using natches (requiring our embeds and related parts). The mold halves can also be lined up by the outer edges before clamping them together (thus not requiring natches).
Typecodes |
Fusion 360 Drawings
These are available for download. Fusion 360 is our chosen 3D solid modelling software as of 2021. To produce these files we export them in F3D format. |
Buy me a coffee and we can talk