Click the link below to go to this page
After watching a youtube video (link below) about a Karelian potter, who uses this technique to make cookware, I could not wait to try it. He unloads the ware from his kiln (which appears to be a standard electric top loader used by potters in the west), and while still hot he immerses pieces in a bucket of milk for a few seconds. When he withdraws them they are steaming. I mixed some 2% milk and cream (to get closer to the whole milk he was using) and cold-dipped an 1850F bisque-fired jar and tile (of Plainsman L210) for about a minute (to enable it to soak in as much as possible). The potter claims to fire his ware to 300-350 degrees. I fired 500F/hr to 612F (350C), then held for 10 minutes and shut off to free fall. And it worked beautifully, high enough to get lots of carbon (which is only on the surface), not high enough to burn it away. The surface is smooth and pleasant-to-touch, it is odor-free. The potter claims it retains this surface over many years despite repeated oven use. This clay body, L210, is well suited since it is very fine-grained and fires to such a smooth unglazed surface. And the carbon makes it much better. Indigenous cultures throughout history have learned how to prepare, cook and store food in terra cotta clays like this, they withstand thermal shock better than vitrified stonewares and porcelains. Of course, more testing is needed, I will report as I proceed.