Monthly Tech-Tip | No tracking! No ads! |
Click the link below to go to this page
https://insight-live.com/insight/recipes.php?OpenFile=woXZ17PTMw
Use this to 3D print a form into which plastic clay can be pressed to make a self supporting cone. This link enters your Insight-live account so you need to be logged in.
Self-supporting cones are a must in each firing but they are expensive. Fortunately the shape of a self-supporting cone is easy to draw in 3D (I did it here in Fusion 360). It is a 25mm equilateral triangle base lofted to a 3mm one 65mm straight up on the front side. And then a cut-out across the front. By using 3D printed molds and plastic clay I can press these by the dozen. What about a recipe? Cones melt short of being glazes but beyond being porcelains. I chose L3685Z3 engobe as a starting point, it has a linear vitrification curve spanning a wide range. Approaching this on the material level, not as a chemistry project, I did three iterations of adding Ferro frit 3110 to the engobe. Shown here are the second, "A" and third, "B" (on the right is an Orton cone 6). B has too much frit, A does not have enough. You likely guessed what I did next: Mixed A and B. The result was almost perfect, bent just a little too much. If you would like this 3D file in Fusion 360 format, it is available in the Files manager in your Insight-live.com account.
Typecodes |
Fusion 360 Drawings
These are available for download in your Insight-live account (it must be current). Fusion 360 is our chosen 3D solid modelling software as of 2021. To produce these files we export them in F3D format. |
---|
Buy me a coffee and we can talk