| Monthly Tech-Tip | No tracking! No ads! |
URL: Join our Facebook group: CAD+3D Printing = Ceramic Molds
Click the link below to go to this page
https://www.facebook.com/groups/ceramicscadplus3d
This is a DIY community for potters, hobbyists, and professionals ready to embrace the power of professional CAD software (many are now free to home users) and affordable consumer 3D PLA filament printers for making plaster molds (we don't 3D print clay here).
Related Information
New Facebook group: CAD+3D = Molds for Ceramics
This picture has its own page with more detail, click here to see it.
It is about using consumer 3D printers (and mostly PLA filament) and professional CAD software (now available for DIYers) to make plaster molds for ceramics. It prioritizes being green, learning to formulate and use your own casting bodies and glazes. Here is what you'll gain:
-Step-by-step guides.
-A constant emphasis on using as little filament and producing as little waste as possible.
-Insights into the cost-effectiveness and simplicity of these tools.
-Motivation to build your own repository of designs, constantly build better skills to improve them and leverage rapid redesign cycles and efficient production.
-Learn to formulate, mix, test and adjust your own casting bodies.
Whether you're a curious hobbyist or a seasoned mold maker, this group will show you why these technologies are the future. It's easier, more affordable, and more rewarding than you think. Let’s mold the possibilities together!
Got a Question?
Buy me a coffee and we can talk 
https://digitalfire.com, All Rights Reserved
Privacy Policy