Learn more about this
Slicer-ready model for 3D printing
Print pieces, insert natch clips and embeds in the holes, pour in the plaster, let it set, remove the PLA with a heat gun, glue the natches and spacers into the embeds, strap mold and glue in the pour spout with slip, fill with slip to make a tester.
|
USD $20.00 |
3MF format file
(ID# 25-35 - Open in your slicer. The funnel is inside the larger section. Print each part by moving it onto the bed (if needed, use place-on-face to orient them right). Print the funnel upside down, use a brim to hold it on the bed.)
Last updated: March 11, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
