A catch glaze of the lower section of a piece of ceramic or pottery is often needed to arrest the flow of reactive runny glazes (so they do not run down on to the kiln shelf).
Key phrases linking here: catcher glazes, catcher glaze, catch glazes, catch glaze - Learn more
A glaze used on lower sections of ceramic and pottery that catches (and stops) runny glazes. Reactive glazes are almost always runny, the interesting surfaces they produce are a consequence of their high melt fluidity. Common functional glazes can be very glossy yet not run at all, they can thus act as a catch to arrest the flow of others. When the color and surface are chosen well their presence can go unnoticed (even on the insides of ware). In many cases, a catch glaze can also act as a liner glaze that not only makes pieces more food-safe but also stops the formation of a lake of thick runny glaze from creating a glaze compression problem.
This iron red cone 6 glaze, G3948A (similar to Amaco Ancient Copper), is applied thickly and runs during firing. With no countermeasures, it ends up on the kiln shelf (like the one on the left). Since this glaze breaks-to-black where thin on the edges of contours, glazing the base black seems like a natural match. The base of this was first dipped in G3914A black, up to about 1 cm (1/2 in). I then waxed over all of the black up to within 1-2mm of its edge. Then I applied the iron red by dipping in the normal way for liner glazing mugs. For this thickness of the brown the black melt is able to catch and stop it within 5mm or less.
Tenmoku reduction fired glazes can be so beautiful yet few people use them. One reason is the melt fluidity - runs stick pieces to the kiln shelf. While the melt fluidity is the key to the appearance it is also the curse. These glazes also pool on inside bottoms producing glaze compression issues. And they stretch thin over rims roughening them with any grit from the body or glaze materials. The running onto the shelf issue at least does have a simple solution: The GR10-A base as a catcher glaze on the outside bottoms and a liner on the inside (and even optionally wrapping over the rim). I use a dipping glaze version of it for the insides and a brushing glaze version for the bases (and up the side walls about 1cm). The tenmokus GR10-K1 (left) and GA10-B (right) can be applied thickly and it’s no problem, 5-10 mm of catcher glaze is all it takes to stop the running.
Cone 6 iron red with a catcher glaze
|By Tony Hansen
Follow me on