Body Tests

BSG | ABR | | BIN | ADV | AGT | PHY | ASR | uAz | ALM | ALS | E11 | JWK | ART | ARC | EBA | LAG | PBA | NFi | BLC | mQi | BIN | 62N | BIO | BSQ | CHP | | BGD | BGP | BFR | Csu | DZc | BRK | HWi | SCS | MCB | SCB | ECS | CSP | OLC | CRE | CPM | CRS | STN | CST | LBS | TIL | C3D | CBM | CLM | ECM | CLO | SLR | CRT | CCT | CLT | GBG | CCO | CCN | CRP | d3S | CGS | OCS | DEC | DFT | | Dux | DRP | DSP | ELE | ELT | MUE | SEU | EEE | MEQ | SCE | EQD | EQP | EQM | EMR | SER | EQS | | ETC | P3D | PAR | PAU | PCA | PBF | PDE | PGL | PKB | PMM | PPO | PPP | PSH | PWT | EXT | FEL | TAA | FRC | 9h6 | FLB | kK5 | FLS | FRT | MFM | YtL | F3D | EGK | GNM | DGE | GBC | GBS | GLS | GLI | GLC | EGL | GLM | GLT | MGL | SGL | FGE | GLZ | GEQ | EHE | fBy | h79 | HTR | CHS | Niv | I3D | ICS | IDP | IGR | EAP | ISO | Qno | qhK | KAO | KCD | EKB | KIL | MKL | SKL | LNS | LAB | vLv | FRL | 7hb | LEM | CQL | LTR | MSH | MOF | MAN | | MRK | MDS | MMC | MPC | MTS | MTT | | MAM | MAA | MDE | MTE | EMP | MPE | CLM | DEN | PWH | MAT | e38 | MTR | BDW | PMF | MIN | 3MM | MMK | EMM | MNC | EMF | yPu | NOX | SOC | | DSL | OPA | QKk | OXI | PTT | SWS | PPS | PRP | | SPM | SPB | MPB | FRP | 9Hv | PEN | POI | PTW | PEQ | a87 | EPR | PRS | PRT | | PRD | PRO | | | | QCC | RMP | RSR | MRM | SRM | RED | RFR | wWm | REF | EAR | SRS | ESK | SWR | | SCU | | YFh | SIL | ESR | LrD | YnJ | ESP | MSM | Tmx | STC | OLS | k67 | JXh | PWS | TWC | EPW | TCP | TCE | WSN | TLS | STL | MTL | TGR | OTR | | | UNI | gLF | WRS | WPS | YQd

Tests conducted on bodies made from materials, as opposed to the materials themselves.

Related Information

Links

Tests	Drying Factor/Water Content/Solubles
Tests	Cold Over Boiled Porosity Use this test to determine if your fired clay can withstand freeze-thaw and thus be suitable for outdoor use in colder climates.
Tests	Density (Specific Gravity) Measure the density of a dried clay test bar
Tests	Drying Factor The DFAC Drying Factor test visually displays a plastic clay's response to very uneven drying. It is beneficial to show the relative drying performance of different clays.
Tests	Dry Strength (kgf/cm2) Measure the tensile strength of a dried clay test bar
Tests	Drying Shrinkage Measure the amount a clay test bar shrinks as it dries
Tests	Dry Strenth (Round Bars)
Tests	Dry Strength (Square Bars) Measure the tensile strength of a square cross section test bar
Tests	Fired Strength Round Bars
Tests	Firing Shrinkage Measure the amount a clay test bar shrinks as it is fired in a kiln
Tests	Fired Strength Square Bars
Tests	Pugged Body Properties Overview
Tests	Sieve Analysis 35-325 Wet A measure of particle size distribution by washing a powdered or slaked sample through a series of successively finer sieves
Tests	Sieve Analysis Dry A measure of particle size distribution by vibrating a powdered sample through a series of successively finer sieves
Tests	Pyroplastic Deformation How to measure the tendency of a ceramic body to warp during firing.
Tests	Clay Water Content - Powder, Plastic
Tests	Deflocculation Demand
Tests	Co-efficient of Linear Expansion In ceramics, glazes expand with increasing temperature. Being brittle materials, they must be expansion-compatible with the body they are on.
Tests	Modulus of Rupture - Dry
Tests	Dry M.O.R. (50% Silica)
Tests	Modulus of Rupture - Fired
Tests	Moisture Content - Powder
Tests	pH (pugged clay)
Tests	Rheology of a Ceramic Slurry
Tests	Shrinkage/Absorption Test SHAB Shrinkage and absorption test procedure for plastic clay bodies and materials
Tests	Simple Shrinkage/Absorption
Tests	Water absorption

Tests

Drying Factor/Water Content/Solubles

Tests

Cold Over Boiled Porosity
Use this test to determine if your fired clay can withstand freeze-thaw and thus be suitable for outdoor use in colder climates.

Tests

Density (Specific Gravity)
Measure the density of a dried clay test bar

Tests

Drying Factor
The DFAC Drying Factor test visually displays a plastic clay's response to very uneven drying. It is beneficial to show the relative drying performance of different clays.

Tests

Dry Strength (kgf/cm2)
Measure the tensile strength of a dried clay test bar

Tests

Drying Shrinkage
Measure the amount a clay test bar shrinks as it dries

Tests

Dry Strenth (Round Bars)

Tests

Dry Strength (Square Bars)
Measure the tensile strength of a square cross section test bar

Tests

Fired Strength Round Bars

Tests

Firing Shrinkage
Measure the amount a clay test bar shrinks as it is fired in a kiln

Tests

Fired Strength Square Bars

Tests

Pugged Body Properties Overview

Tests

Sieve Analysis 35-325 Wet
A measure of particle size distribution by washing a powdered or slaked sample through a series of successively finer sieves

Tests

Sieve Analysis Dry
A measure of particle size distribution by vibrating a powdered sample through a series of successively finer sieves

Tests

Pyroplastic Deformation
How to measure the tendency of a ceramic body to warp during firing.

Tests

Clay Water Content - Powder, Plastic

Tests

Deflocculation Demand

Tests

Co-efficient of Linear Expansion
In ceramics, glazes expand with increasing temperature. Being brittle materials, they must be expansion-compatible with the body they are on.

Tests

Modulus of Rupture - Dry

Tests

Dry M.O.R. (50% Silica)

Tests

Modulus of Rupture - Fired

Tests

Moisture Content - Powder

Tests

pH (pugged clay)

Tests

Rheology of a Ceramic Slurry