|Monthly Tech-Tip |
An indicator of the density and therefore degree of vitrification of a fired clay body. Typically a body sample is fired at a range of temperatures and absorption measurements are done on each to produce a graph of porosity vs. temperature. Absorption is measured by weighing a bar before and after boiling in water and calculating the percentage increase in weight. Use the SHAB test to compile this information.
Enter the percent porosity and temperature
SHAB Shrinkage and absorption test procedure for plastic clay bodies and materials
Tests conducted on bodies made from materials, as opposed to the materials themselves.
ASTM-C373 Water Absorption
|By Tony Hansen|
Follow me on