Monthly Tech-Tip | No tracking! No ads! |
Description: Strontium frit
Oxide | Analysis | Formula | |
---|---|---|---|
Na2O | 5.00% | 0.18 | |
SrO | 39.00% | 0.82 | |
Al2O3 | 8.00% | 0.17 | |
B2O3 | 7.00% | 0.22 | |
SiO2 | 41.00% | 1.49 | |
Oxide Weight | 218.77 | ||
Formula Weight | 218.77 |
These materials have many issues. They can create problems in glaze slurries (like precipitates, higher drying shrinkage), cause issues with laydown density and produce fired surface defects (like pinholes, blisters, orange peeling, crystallization). Lithium and barium carbonates have toxicity issues and the carbon burns off during firing (with lithium, for example, 60% of its weight is lost). Yet the oxides that these materials supply to the glaze melt - ZnO, Li2O, BaO and SrO can be sourced from frits (removing most of the problems and imparting better glaze melting). Fusion Frit F-493 has 11% LI2O, F-403 has 35% BaO, F-581 has 39% SrO and FZ-16 has 15% ZnO. Of course, these frits source other oxides (but such are common in most glazes). Using glaze calculation you can often duplicate the chemistry of glazes while sourcing these oxides from frits. This being said, using the frits is about achieving a quality and avoid defects over concerns about their extra cost. Often the benefits lower the overall cost of production.
URLs |
http://www.fusionceramics.com/
Fusion Ceramics Frit Website |
---|---|
Typecodes |
Frit
A frit is the powdered form a man-made glass. Frits are premelted, then ground to a glass. They have tightly controlled chemistries, they are available for glazes of all types. |
By Tony Hansen Follow me on |
Buy me a coffee and we can talk