| Monthly Tech-Tip | No tracking! No ads! |
2019 Jiggering-Casting Project of Medalta 66 Mug
Beer Bottle Master Mold via 3D Printing
Build a kiln monitoring device
Coffee Mug Slip Casting Mold via 3D Printing
Comparing the Melt Fluidity of 16 Frits
Cookie Cutting clay with 3D printed cutters
Evaluating a clay's suitability for use in pottery
Make a mold for 4-gallon stackable calciners
Make Your Own Pyrometric Cones
Making a high quality ceramic tile
Making a jigger mold for producing cereal bowls
Making a Plaster Table
Making Bricks
Making our own kilns posts using a hand extruder
Making your own sieve shaker for slurries
Medalta Ball Pitcher Slip Casting Mold via 3D Printing
Medalta Jug Master Mold Development
Mother Nature's Porcelain - Plainsman 3B
Nursery Plant Pot
Pie-Crust Mug-Making Method
Plainsman 3D, Mother Nature's Porcelain/Stoneware
Project to Document a Shimpo Jiggering Attachment
Roll, Cut, Pull, Attach Handle-making Method
Slurry Mixing and Dewatering Your Own Clay Body
Testing a New Load of EP Kaolin
Using milk as a glaze
Beer Bottle Master Mold via 3D Printing
Build a kiln monitoring device
Coffee Mug Slip Casting Mold via 3D Printing
Comparing the Melt Fluidity of 16 Frits
Cookie Cutting clay with 3D printed cutters
Evaluating a clay's suitability for use in pottery
Make a mold for 4-gallon stackable calciners
Make Your Own Pyrometric Cones
Making a high quality ceramic tile
Making a jigger mold for producing cereal bowls
Making a Plaster Table
Making Bricks
Making our own kilns posts using a hand extruder
Making your own sieve shaker for slurries
Medalta Ball Pitcher Slip Casting Mold via 3D Printing
Medalta Jug Master Mold Development
Mother Nature's Porcelain - Plainsman 3B
Nursery Plant Pot
Pie-Crust Mug-Making Method
Plainsman 3D, Mother Nature's Porcelain/Stoneware
Project to Document a Shimpo Jiggering Attachment
Roll, Cut, Pull, Attach Handle-making Method
Slurry Mixing and Dewatering Your Own Clay Body
Testing a New Load of EP Kaolin
Using milk as a glaze
Roll, Cut, Pull, Attach Handle-making Method
Coming soon
Related Information
Why were these handles pulled an hour after the mugs were thrown?
Because they dry and stiffen much faster. When the handles are glued on with slip about an hour later they are about the same stiffness as the mugs. The handled mugs, which are sitting on plaster batts, will then be covered with cloth and plastic over night. The next morning, the bases will have stiffened and all sections of the mugs will be about the same stiffness, ready for trimming. After that they will be decorated, then placed on smooth wooden batts and wrapped with a cloth for drying.
These mugs are in the leather-hard stage
They have just been trimmed. The clay has dried firm enough to handle them without pushing them out of shape too much, but not so much that it is difficult to tool and flute the foot ring.
| By Tony Hansen Follow me on        |  |
Got a Question?
Buy me a coffee and we can talk 
https://digitalfire.com, All Rights Reserved
Privacy Policy