Learn more about this
CAD drawing for SHAB test bar marker
Fine tune the 10cm outside dimension as needed
|
USD $4.00 |
F3D format file
(Open in Fusion 360)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
3MF format file
(Open using your slicer software, then 3D print)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
STEP format file
(Import into your CAD software)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of a light-weight kiln post extrusion die
For use with a hand extruder
|
USD $4.00 |
F3D format file
(Open in Fusion 360)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
STEP format file
(Import into your CAD software)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of clamping baseplate
A round clamping baseplate that can be securely clamped under 3D printed shell molds used to cast plaster.
|
USD $4.00 |
STEP format file
(Import into your CAD software, set the diameter and print)
Last updated: February 18, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
F3D format fie
(Open and adjust diameter in Fusion 360, then print)
Last updated: February 18, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of all the parts to make a plaster jigger mold and template
This has an accompanying step-by-step video how it was drawn. It works on small or large 3D printers and uses an absolute minimum of PLA filament.
|
USD $0.00 |
F3D format file
(Open and adjust in Fusion 360, then print.)
Last updated: February 18, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $0.00 |
STEP format file
(Import into your CAD software, adjust and print)
Last updated: February 18, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of clamping reusable jigger mold
Clamp it in place over a model of the inside shape of the vessel. This prints thin-walled but is strong by virtue of the flanges.
|
USD $4.00 |
STEP format file
(Import into your CAD software, adjust for size and print)
Last updated: February 23, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
F3D format file
(Open and adjust for size in Fusion 360, then print.)
Last updated: February 23, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of triangle plate shell mold
3D print and pour plaster into it to make a plate press mold
|
USD $4.00 |
3MF format file
(Import into your CAD software, adjust and print)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
F3D format file
(Open and adjust in Fusion 360, then print)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Drawing for sieve shaker to process ceramic slurries
For use with Tyler or similar laboratory sieves
|
USD $4.00 |
STEP format file
(Import into your CAD software)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
F3D format file
(Open in Fusion 360)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Jigger attachment for a potters wheel
Have this built at a machine shop
|
USD $5.00 |
F3D format file
(Open in Fusion 360)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
STEP format file
(Import into your CAD software)
Last updated: February 28, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of mold for casting slip SHAB test bars
3D print the mold, pour the two plaster halves. Print the three chamber spout.
|
USD $6.00 |
Step format file
(Import into your CAD software)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $6.00 |
F3D format file
(Open in Fusion 360)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Slicer-ready model for 3D printing
Print it, insert natch hardware in the holes, strap mold, glue in the pour spout with slip and fill with plaster to make a mold.
|
USD $20.00 |
3MF format file
(Open in your slicer and 3D print)
Last updated: March 4, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of mug handle mold (without spare)
A 3D printable mold for making mug, pitcher and teapot handles custom fit to the vessel's contours. This has an accompanying step-by-step video how it was drawn.
|
USD $5.50 |
F3D format file
(Open and adjust in Fusion 360, then print.)
Last updated: February 28, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.50 |
STEP format file
(Import into your CAD software, adjust and print)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of mug handle mold (with spare)
A 3D printable mold for making mug, pitcher and teapot handles custom fit to the vessel's contours.
|
USD $6.00 |
F3D format file
(Open and adjust in Fusion 360, then print.)
Last updated: January 29, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $6.00 |
STEP format file
(Import into your CAD software, adjust and print)
Last updated: January 29, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of mold natch parts
The natches, spacers, clips and embeds were developed for making molds for slip casting.
|
USD $5.00 |
F3D format file
(Open and adjust in Fusion 360, then print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
STEP format file
(Import this into most CAD software, adjust, then print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
3MF format file
(Open in your slicer, duplicate or delete objects, arrange and print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Standard 3/8 inch mold natch
These are hard to find online but easy to print and modify yourself.
|
USD $4.00 |
CAD drawing in F3D format
(Open and adjust in Fusion 360, then export to slicer.)
Last updated: January 17, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
CAD drawing in 3MF format
(Open in your slicer software, duplicate, arrange and print.)
Last updated: January 17, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
CAD drawing in STEP format
(Import into your CAD software, adjust and print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $25.00 |
50 3D-Printed natches
(Print from PLA filament)
pkg of 50 |
Learn more about this
CAD drawing of mug jigger mold
A 3D printable shell for casting a working plaster mold for jiggering and/or slip-casting. Three pieces must be printed and glued. The pour spout is a fourth piece. Key measurements are parameterized.
|
USD $5.25 |
F3D format file
(Open and adjust in Fusion 360, then print.)
Last updated: February 28, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.25 |
STEP format file
(Import into your CAD program, adjust and then print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of a 3D printable propeller
A Fusion 360 CAD drawing of a 3D printable propeller for friction mounting onto a mixer shaft. A step-by-step video shows how it was drawn.
|
USD $3.00 |
F3D format file
(Open and adjust in Fusion 360, then print.)
Last updated: January 15, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $3.00 |
STEP format file
(Import into your CAD software, adjust and then print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
