Learn more about this
CAD drawing for SHAB test bar marker
Fine tune the 10cm outside dimension as needed
|
USD $4.00 |
F3D format file
(ID# 23-30 - Open in Fusion 360)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
3MF format file
(ID# 23-31 - Open using your slicer software, then 3D print)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
STEP format file
(ID# 23-32 - Import into your CAD software)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of a light-weight kiln post extrusion die
For use with a hand extruder
|
USD $4.00 |
F3D format file
(ID# 24-33 - Open in Fusion 360)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
STEP format file
(ID# 24-34 - Import into your CAD software)
Last updated: February 26, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Melt fluidity tester 3D printable model
Prints quickly to only 47 grams. Has no steep overhangs.
|
USD $6.50 |
3MF format file
(ID# 26-36 - Open in your slicer and print without support or infill.)
Last updated: March 7, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of clamping baseplate
A round clamping baseplate that can be securely clamped under 3D printed shell molds used to cast plaster.
|
USD $4.00 |
STEP format file
(ID# 15-16 - Import into your CAD software, set the diameter and print)
Last updated: February 18, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
F3D format fie
(ID# 15-17 - Open and adjust diameter in Fusion 360, then print)
Last updated: February 18, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of all the parts to make a plaster jigger mold and template
This has an accompanying step-by-step video how it was drawn. It works on small or large 3D printers and uses an absolute minimum of PLA filament.
|
USD $5.00 |
F3D format file
(ID# 16-18 - Open and adjust in Fusion 360, then print.)
Last updated: February 18, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
STEP format file
(ID# 16-19 - Import into your CAD software, adjust and print)
Last updated: February 18, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Design As a Service
Would you like us to work with you to customize this drawing, create a new one and/or have us 3D print the parts? Please use the contact form below.
Learn more about this
CAD drawing of clamping reusable jigger mold
Clamp it in place over a model of the inside shape of the vessel. This prints thin-walled but is strong by virtue of the flanges.
|
USD $4.00 |
STEP format file
(ID# 17-20 - Import into your CAD software, adjust for size and print)
Last updated: February 23, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
F3D format file
(ID# 17-21 - Open and adjust for size in Fusion 360, then print.)
Last updated: February 23, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of triangle plate shell mold
3D print and pour plaster into it to make a plate press mold
|
USD $4.00 |
3MF format file
(ID# 18-22 - Import into your CAD software, adjust and print)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
F3D format file
(ID# 18-23 - Open and adjust in Fusion 360, then print)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Drawing for sieve shaker to process ceramic slurries
For use with Tyler or similar laboratory sieves
|
USD $4.00 |
STEP format file
(ID# 20-24 - Import into your CAD software)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
F3D format file
(ID# 20-25 - Open in Fusion 360)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Jigger attachment for a potters wheel
Have this built at a machine shop
|
USD $5.00 |
F3D format file
(ID# 21-26 - Open in Fusion 360)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
STEP format file
(ID# 21-27 - Import into your CAD software)
Last updated: February 28, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of mold for casting slip SHAB test bars
3D print the mold, pour the two plaster halves. Print the three chamber spout.
|
USD $6.00 |
Step format file
(ID# 22-28 - Import into your CAD software)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $6.00 |
F3D format file
(ID# 22-29 - Open in Fusion 360)
Last updated: February 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Slicer-ready model for 3D printing
Print pieces, insert natch clips and embeds in the holes, pour in the plaster, let it set, remove the PLA with a heat gun, glue the natches and spacers into the embeds, strap mold and glue in the pour spout with slip, fill with slip to make a tester.
|
USD $20.00 |
3MF format file
(ID# 25-35 - Open in your slicer. The funnel is inside the larger section. Print each part by moving it onto the bed (if needed, use place-on-face to orient them right). Print the funnel upside down, use a brim to hold it on the bed.)
Last updated: March 11, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Einstein Tile Cookie Cutter
The 3D file is parametric, all side lengths are proportional to side 1 of 20mm (so it is easy to change size in CAD versions).
|
USD $4.00 |
3MF Format File
(ID# 27-41 - Open in your slicer software and 3D print "side 1 20mm" tiles)
Last updated: April 16, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
F3D Format File
(ID# 27-42 - Open in Fusion 360 to change parameters, reverse extrusions to print reverse side cutters.)
Last updated: April 16, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
STEP Format File
(ID# 27-43 - Open in your CAD software to size and configure, reverse extrusions to print reverse side cutters.)
Last updated: April 16, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Design As a Service
Would you like us to work with you to customize this drawing, create a new one and/or have us 3D print the parts? Please use the contact form below.
Learn more about this
CAD drawing of a block mold for making jigger molds for a Giffin Grip
|
USD $5.00 |
STEP format file
(ID# 28-45 - Open and adjust in Fusion 360, then 3D print.)
Last updated: May 13, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
F3D format file
(ID# 28-46 - Import into your CAD software, adjust and 3D print.)
Last updated: May 13, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of banding wheel
The spinning platform consists of a bottom part, into which the bearing fits - it slides inside the upper (after plaster is poured in). The pedestal fits inside the bearing.
|
USD $5.00 |
STEP format file
(ID# 29-47 - Import into your CAD software, set parameters, print, fill with plaster to give weight)
Last updated: May 21, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
F3D format file
(ID# 29-48 - Open and adjust in Fusion 360, print, file with plaster to give weight)
Last updated: May 21, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
3MF format file
(ID# 29-49 - Surface model readable by a slicer. Download, open and print as a sample. You cannot change parameters.)
Last updated: May 22, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of jar for bail-and-latch mechanism
Print this for demonstration purposes. It will motivate you for the next step of making a mold. We will provide a drawing for that in future.
|
USD $5.00 |
F3D format file
(ID# 30-50 - Open and adjust in Fusion 360, then print.)
Last updated: May 23, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
STEP format file
(ID# 30-51 - Import into your CAD software, adjust, then print)
Last updated: May 23, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
3MF format file
(ID# 30-52 - Open in your slicer software and 3D print)
Last updated: May 23, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of thread anchor
For embedding into plaster to enable attaching 3D printed elements
|
USD $4.00 |
F3D format file
(ID# 31-53 - Open and adjust in Fusion 360, then print)
Last updated: June 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
STEP format file
(ID# 31-54 - Import into your CAD software, adjust and print)
Last updated: June 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
3MF format file
(ID# 31-55 - Open in your slicer, orient and then print)
Last updated: June 25, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of a mold pouring spout
Stick these onto the tops of spareless molds to make casting easier and more precise. Default size is for our beer bottle mold. Many parameters can be adjusted.
|
USD $3.00 |
F3D format CAD file
(ID# 33-59 - Open in Fusion 360 and adjust parameters, then 3D print as many as needed)
Last updated: June 30, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $3.00 |
STEP format CAD file
(ID# 33-60 - Import into your CAD software, adjust parameters, then 3D print as many as needed)
Last updated: June 30, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $3.00 |
3MF format CAD file (default size for beer bottle mold)
(ID# 33-61 - Open in your slicer software and print)
Last updated: June 30, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
CAD drawing of mug handle mold (without spare)
A 3D printable mold for making mug, pitcher and teapot handles custom fit to the vessel's contours. This has an accompanying step-by-step video how it was drawn.
|
USD $5.50 |
F3D format file
(ID# 5-3 - Open and adjust in Fusion 360, then print the molds and spouts.)
Last updated: March 7, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.50 |
STEP format file
(ID# 5-13 - Import into your CAD software, adjust and print the molds and spouts.)
Last updated: March 7, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Design As a Service
Would you like us to work with you to customize this drawing, create a new one and/or have us 3D print the parts? Please use the contact form below.
Learn more about this
CAD drawing of mug handle mold (with spare)
A 3D printable mold for making mug, pitcher and teapot handles custom fit to the vessel's contours.
|
USD $6.00 |
F3D format file
(ID# 14-14 - Open and adjust in Fusion 360, then print.)
Last updated: March 7, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $6.00 |
STEP format file
(ID# 14-15 - Import into your CAD software, adjust and print)
Last updated: March 7, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Design As a Service
Would you like us to work with you to customize this drawing, create a new one and/or have us 3D print the parts? Please use the contact form below.
Learn more about this
CAD drawing of mold natch parts
The natches, spacers, clips and embeds were developed for making molds for slip casting.
|
USD $5.00 |
F3D format file
(ID# 7-5 - Open and adjust in Fusion 360, then print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
STEP format file
(ID# 7-6 - Import this into most CAD software, adjust, then print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.00 |
3MF format file
(ID# 7-11 - Open in your slicer, duplicate or delete objects, arrange and print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Learn more about this
Standard 3/8 inch mold natch
These are hard to find online but easy to print and modify yourself.
|
USD $4.00 |
CAD drawing in F3D format
(ID# 13-8 - Open and adjust in Fusion 360, then export to slicer.)
Last updated: January 17, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
CAD drawing in 3MF format
(ID# 13-9 - Open in your slicer software, duplicate, arrange and print.)
Last updated: January 17, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $4.00 |
CAD drawing in STEP format
(ID# 13-10 - Import into your CAD software, adjust and print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $25.00 |
50 3D-Printed natches
(ID# 13-12 - Print from PLA filament)
pkg of 50 |
Learn more about this
CAD drawing of mug jigger mold
A 3D printable shell for casting a working plaster mold for jiggering and/or slip-casting. Three pieces must be printed and glued. The pour spout is a fourth piece. Key measurements are parameterized.
|
USD $5.25 |
F3D format file
(ID# 4-1 - Open and adjust in Fusion 360, then print.)
Last updated: February 28, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $5.25 |
STEP format file
(ID# 4-2 - Import into your CAD program, adjust and then print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
Design As a Service
Would you like us to work with you to customize this drawing, create a new one and/or have us 3D print the parts? Please use the contact form below.
Learn more about this
CAD drawing of a 3D printable propeller
A Fusion 360 CAD drawing of a 3D printable propeller for friction mounting onto a mixer shaft. A step-by-step video shows how it was drawn.
|
USD $3.00 |
F3D format file
(ID# 6-4 - Open and adjust in Fusion 360, then print.)
Last updated: January 15, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
|
USD $3.00 |
STEP format file
(ID# 6-7 - Import into your CAD software, adjust and then print.)
Last updated: January 19, 2025 |
| Goes to PayPal, returns here where the download button will appear. |
