•The secret to cool bodies and glazes is a lot of testing.
•The secret to know what to test is material and chemistry knowledge.
•The secret to learning from testing is documentation.
•The place to test, do the chemistry and document is an account at https://insight-live.com
•The place to get the knowledge is https://digitalfire.com

Sign-up at https://insight-live.com today.

pH for dry powder - pHPW

This test procedure was employed in the Foresight Ceramic Database and now is available for those having an account at Insight-Live.com. Accumulating test data using the variables defined in these procedures enables us to create tools that enable you to compare the physical properties of materials and recipes.

Notes

pH is not a characteristic of powders, but pH of powdered materials is specified as a value @ a specific percentage of solids (e.g. 5%).

Apparatus
1. 125 ml glass stoppered flask
2. Glass beaker 100 ml.
3. PH meter
4. Distilled Water

Procedure:
Weigh 5 gms of the test sample and transfer into the flask. Add a 100 ml. of the distilled water, stopper the flask and shake (for a minute). Allow it to settle for one hour. Calibrate the pH meter and transfer an appropriate amount of the clear aqueous solution from the flask into the beaker. Measure the pH value and report.

Test AFS 113-87-5

Variables

Valu - Value (V)

Out Bound Links


By Tony Hansen




Feedback, Suggestions

Your email address

Subject

Your Name

Message


Copyright 2003, 2008, 2015 https://digitalfire.com, All Rights Reserved