Digitalfire Test Procedure Database

 Logged in as Level 2 access: Logout

Oxides | Minerals | Materials | Recipes | Articles | Glossary | Hazards | Library | MDT | Pictures | Properties | Schedules | Temperatures | Tests | Troubles | Typecodes

Multi Variable

44MR - +44 and +63 Micron Residue

BLOI - Borate LOI

CDRY - Drying Factor/Water Content/Solubles

CLWC - Clay Water Content - Powder, Plastic

COVB - Cold Over Boiled Porosity

CSSS - Clay, Silt, Sand Sedimentation Test

DFAC - Drying Factor

DSRN - Dry Strenth (Round Bars)

DSTR - Dry Strength (Square Bars)

FRRD - Fired Strength Round Bars

FSTR - Fired Strength Square Bars

GLAZ - Glaze Observations

GLFL - Glaze Melt Flow

GLLE - Glaze Leaching Test

HMA - Heating Microscope Analysis for Frits

LDW - LOI/Density/Water Content

PBPO - Pugged Body Properties Overview

pHPG - pH (pugged clay)

PPD - Pyroplastic Deformation

RHEO - Rheology of a Ceramic Slurry

SHAB - Shrinkage/Absorption

SIEV - Sieve Analysis 35-325 Wet

SOLU - Soluble Salts

SSAB - Simple Shrinkage/Absorption

WRA - Whole Rock Analysis

Single Variable

APPO - Apparent Porosity

AVPS - Average Particle Size (Microns)

AVSC - Apparent Viscosity (cps)

BDGC - Bulk Density g/cc (Packed)

BDLB - Bulk Density lbs/cu. ft. (Packed)

CEC - CEC (meq/100g)

CIGF - Boiling Water:Ice Water Glaze Fit Test

COLE - Co-efficient of Linear Expansion

DENS - Density (Specific Gravity)

DFDM - Deflocculation Demand

DNLP - Density, loose packed (lbs/cu fut)

DS - Dry Strength (kgf/cm2)

DSHR - Drying Shrinkage

DTMP - Decomposition Temperature

FSHR - Firing Shrinkage

FTP - Frit Transformation Point

GEBR - GE Brightness

GLHD - Glaze Hardness

GTTM - Glass Transition Temp (Tg)

HEGF - Hegman Fineness

HMOH - Hardness (Moh)

IFP - I.F.P. (celsius)

L10M - % < 10 microns

L1M - % < 1 micron

L20M - % < 20 microns

L2M - % < 2 microns

L30M - % < 30 microns

L5 - % < 5 microns

L5M - % < 0.5 microns

LOI - LOI (100-1000C)

LQLM - Liquid Limit

MDPS - Median Particle Size (Microns)

MLPT - Melting Point (MP)

MLRG - Melting Range (C)

MOIP - Moisture Content - Powder

MOR - Modulus of Rupture

MOR5 - Dry M.O.R. (50% Silica)

MORD - Dry M.O.R.

OLAD - Oil Adsorption (Spatula)

P325 - % Passing 325 Mesh Wet

PCE - Pyrometric Cone Equivalent

pHPW - pH of dry powder

PSHP - Particle Shape (1-7 microns)

RC - Reheat Change

SADR - Sieve Analysis Dry

SAMG - Surface Area (m2/gm)

SLBY - Solubility

SVWT - Sieve Analysis Wet

TGA - TGA

TREL - Trace Elements (ppm)

TRMN - Trace Minerals

UPSD - Ultimate Particle Size Distribution

WABS - Water absorption

WOPL - Water of Plasticity

WSR - Wet Sieve Residue

XREF - Index of Refraction

Dry M.O.R. - MORD

Notes

Modulus of Rupture refers to the resistance of a ceramic bar to breaking when supported on two points and subjected to an increasing force at its midpoint.

Default units are psi, otherwise specify.

Variables

VAL - Value (V)

Out Bound Links

In Bound Links

  • (Tests) MOR - Modulus of Rupture
  • (Articles)

    Binders for Ceramic Bodies

    An overview of the major types of organic and inorganic binders used in various different ceramic in...



Feedback, Suggestions

Your email address

Subject

Your Name

Message

Copyright 2003, 2008 http://digitalfire.com, All Rights Reserved
 Get a free INSIGHT software trial

INSIGHT is ceramic chemistry
calculation software that runs on
Windows, Mac and Linux and talks
to this web site. ()